Tag Set-up

To get started with your Tag you’ll need:

– Your CleanSpace Tag

– A pen/any object to access the Tag’s reset button

– A CleanSpace account. If you don’t already have one then you can register here.

– To install the latest version of the CleanSpace App available from the App Store or Google Play.

First: Install the app!

– Download the CleanSpace App and install it on your phone.

– Sign in with your CleanSpace account to start using the App.

How to reset & wake the Tag up

– On the side of your Tag, you’ll see a small reset button (this looks like a small hole).

– Reset: use a pen and press the reset button for 8 seconds. This will reset your Tag and put it into Sleep Mode. This will delete any readings on the Tag.

– Wake up: use a pen and press the reset button shortly when prompted to do so from the App. This will cause the LED to light up for about 5 – 7 secs and go off again. This will wake up the Tag and put it into Pairing Mode.

Pair the Tag with your CleanSpace App

1. Make sure your Bluetooth and Wifi/data are on.

2. Open the CleanSpace App.

3. Place your phone close to the Tag.

4. Go to the ‘Add a Tag’ button on your home screen.

5. Press the button on the side of the Tag, followed by the ‘Add’ button. It can take up to 30 seconds for the pairing to be completed.

6. When ‘Bluetooth Pairing Request’ appears on your screen press Pair. Please note that if you have already updated to the latest firmware, this step will no longer apply.

img_1421

7. Wait until the pairing process is 100% complete. You can now see the Tags measurements in the ‘My Air’ section by pressing on My Air button.

6_PairComplete

8. Now you’re good to go. Just remember that the Tag needs up to 2 hours to calibrate.

7_AirGraphCalibration

CleanSpace Tag intended operation

The Tag takes measurements every 10 minutes if static. If you are on a journey, with tracking enabled within the App, the Tag will automatically increase the measurement frequency in order to provide you with the most accurate data.

5 minutes of 60 second intervals

When the ‘Boost Readings’ button within the app is pressed, the Tagcorder analyses the air around the Tag, and notifies you once the analysis has been carried out, showing detailed readings of air pollution levels from the last five minutes on the Air Graph. To do this press the ‘Boost Readings’ button. After 5 minutes, go to your Air Graph and you will see the results.

 

Errors / Troubleshooting

When trying to pair with or connecting to your Tag the following errors might appear:

Pairing Error

8_PairingError

– Use a pen and press the reset button for about 8 seconds. This will reset your Tag. Then press shortly to put your Tag into pairing mode.

– Press Try Again and follow steps 5-7 in section Pair the Tag with your CleanSpace App

Pairing Error: ‘Pair a CleanSpace Tag’ option still appears in ‘App Settings’ after pairing

– For iOS, you’ll need to first go to Bluetooth settings in your phone. Click on the info icon next to your Tag and choose ‘Forget This Device’.

– Reset the Tag and Wake it up, as shown in How to reset & wake the Tag up! Section, and then follow steps 1-7

Multiple Tags Found

9_MultipleTagsError

– Make sure that you keep your Tag close to the phone and that there are no other Tags nearby.

– Press Try Again and follow steps 5-7 in section Pair the Tag with your CleanSpace App

Internet Connection Error

10_InternetError

– You must be connected to the internet to register your Tag (when you try to Pair).

– Switch on Data services or WIFI on your phone, then Press Try Again and follow steps 1-7 in section Pair the Tag with your CleanSpace App

Bluetooth Turned Off

11_BluetoothOffError

– Your Bluetooth must be turned on to connect to/pair with your Tag.

– Press Settings and turn your Bluetooth on, then follow steps 1-7 in section Pair the Tag with your CleanSpace App

If you experience any connection errors, go to the Bluetooth Settings in your phone, click on the Info icon next to your Tag and choose ‘Forget this Device’.  Reset the Tag and Wake it up, as shown in How to reset & wake the Tag up section, and then follow steps 1-7.

 

12_BluetoothSettings

13_BluetoothSettings

14_BluetoothSettings

 

See your Readings

Go to the ‘Air’ tab and then visit the Air Graph screen to see your data appear – this can take up to 30 seconds.

If you receive the error message ‘No Data Available’ please go back to your home screen and slide the screen down a few times to make sure that the App is updated. Once this is complete, go back to your Air Graph and you should see your data.

 

Regulatory Notices

EC DECLARATION OF CONFORMITY

WE      Drayson Technologies (Europe) Limited

OF       Unit 29, Chancerygate Business Centre, Langford Lane, Kidlington, Oxfordshire, OX5 1FQ

DECLARE ON OUR SOLE RESPONSIBILITY THAT THE PRODUCT:

                                                                   Cleanspace Tag

                                                                   Model: CS TAG1

IS IN CONFORMITY WITH THE FOLLOWING DIRECTIVES:

DIRECTIVE 2004 / 108 /                      EC Electromagnetic Compatibility

DIRECTIVE 1999 / 5 / EC                    Radio and Telecommunications Terminal Equipment

 

It is confirmed that the samples of the product have been tested and found in conformity with the following standard(s):

EN 301 489-1 v1.9.2                            Radiated Immunity

EN 55011:2009+A1:2010                   Emissions

EN 61326-1:2013                                 Radiated Immunity

EN 300 328 v.1.9.1 (2015-02)           Full Radio Testing

EN 61010-1:2010 (Third Edition)   Safety requirements for electrical equipment for measurement, control and laboratory use

CE Marking

USA: FCC ID:2AG7Q-CS-TAG1

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

No changes shall be made to the equipment without the manufacturer’s permission as this may void the user’s authority to operate the equipment.

This device complies with the FCC safety requirements for RF exposure in accordance with FCC rule part §2.1093

Canada: IC:21055-CSTAG1

This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions:

(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.

CleanSpace Tag complies with the safety requirements for RF exposure in accordance with RSS-102 Issue 5 for portable use conditions.

Cet appareil est conforme à la norme RSS d’Industrie Canadienne applicables aux dispositifs radio communicant exempts de licence. Son fonctionnement est soumis aux deux conditions suivantes:

(1) cet appareil ne doit pas provoquer d’interférence nuisible et,
(2) cet appareil doit être susceptible a toute interférence reçue y compris les interférences pouvant perturber le fonctionnement de l’appareil.

Le CleanSpace Tag est conforme aux limites RSS 102 issue 5 applicable par l’Industrie Canadienne sur les conditions de sécurité concernant l’exposition humaine aux radiofréquences (RF) pour l’utilisation des dispositifs portables.